74HC14的作用：六反相斯密特触发器

真值表：Y=A

Input输入output输出AYLHHL

                图1  引脚功能

极限参数：

Recommended Operating Conditions建议操作条件 Symbol 符号Parameter 参数最小典型最大UNIT 单位VCCSupply Voltage 电源电压4.7555.25VVT+Positive-Going Input Threshold Voltage 正向输入阈值电压(Note 2)1.41.61.9VVT-Negative-Going Input Threshold Voltage 反向输入阈值电压(Note 2)0.50.81VHYSInput Hysteresis 输入滞后(Note 2)0.40.8-VIOHHIGH Level Output Current高电平输出电流---0.4mAIOLLOW Level Output Current低电平输出电流--8mATAFree Air Operating Temperature工作温度0-70℃Note 2: VCC = 5V.

Electrical Characteristics 电气特性over recommended operating free air temperature range (unless otherwise noted)Symbol 符号Parameter 参数Conditions 条件最小典型最大UNIT 单位VIInput Clamp Voltage输入钳位电压VCC = 最小, II = -18mA---1.5VVOHHIGH Level Output Voltage输出高电平电压VCC=最小,IOH=最大 VIL=最大2.73.4-VVOLLOW Level输出低电平电压VCC = 最小, IOL = 最大-0.350.5--Output Voltage输出电压VIH = 最小---VVCC = 最小, IOL = 4mA-0.250.4IT+Input Current at Positive-Going Threshold 正向阈值输入电流VCC = 5V, VI = VT+--0.14-mAIT-Input Current at Negative-Going Threshold反向阈值输入电流VCC = 5V, VI = VT---0.18-mAIIInput Current @ MAX Input Voltage输入电流@最大输入电压VCC = 最大, VI = 7V--0.1mAIIHHIGH Level Input Current输入高电平电流VCC = 最大, VI = 2.7V--20μAIILLOW Level Input Current输入低电平电流VCC = 最大, VI = 0.4V---0.4mAIOSShort Circuit Output Current短路输出电流VCC = 最大 (Note 4)-20--100mAICCHSupply Current with Out puts HIGH高电平输出电源电流VCC = 最大-8.616mAICCLSupply Current with Outputs LOW低电平输出电源电流VCC = 最大-1221mANote 3:  VCC = 5V, TA = 25℃.Note 4: Not more than one output should be shorted at a time, and the duration should not exceed one second.

Switching Characteristics开关特性 at VCC = 5V and TA = 25℃

Parameter 参数

应用电路：

                    图2 光电藕合器接收整形电路

                                      图3  方波振荡器

相关IC下载
 LC864512—5C77/N801 LA7687A（N201） LA4285(N
 AN5195K、AN5199、AN5265、AN5274、AN5521、AN5
 AD9883APDF格式参考资料。
 BA3880S、BA7001、BA7021等PDF格式参考资料
 CTV222S等PDF格式参考资料
 CXP84420-X133SP等PDF格式参考资料
 KA9258D等PDF格式参考资料
 LA4225、LA4285、LA4287、LA7680、LA7688A、LA7
 LC863320A、LC864912A、LC864916A、等PDF格式参
 M51393AP参考资料